ALL OVER PRINT | SUBLIMATION TRANSFER | READY TO PRESS | GANG SHEET

ALL OVER PRINT | SUBLIMATION TRANSFER | READY TO PRESS | GANG SHEET

Regular price
$45.00
Sale price
$45.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

YOU DESIGN IT, WE PRINT IT!

Sublimation Transfer for All Over Print (AOP) or Gang Sheet! Ready to press! Designs are printed on 44x36 sublimation transfer paper. 

FULLY GANG YOUR 44X36 SHEET AND SEND TO US VIA EMAIL OR WETRANSFER.COM

MUST BE MOCKED UP AND READY TO PRINT - 300 DPI

44X36 SHEET


**This order is for a sublimation transfer PRINT ONLY! *Actual colors may differ from the picture as monitor screens are different. 

How to use Sublimation Transfers for shirts: Transfers must be used on a shirt that is a minimum of 50% polyester. A 50% polyester item will give you a vintage look.

The higher the polyester count, the brighter the colors. You will need to use white or light colored shirts in order for the design to show up. You will need a heat press to use this transfer. Butcher paper and instructions are included with every order.

Instructions for Polyester Shirts are as follows:

  • Set temperature to 400 degrees Fahrenheit.
  • Set timer to 45-55 seconds.
  • Set Pressure at medium.
  • Lint roll shirt.
  • Put butcher paper inside the garment to ensure the ink does not bleed through the shirt to the back.
  • Place transfer face down on garment.
  • Place butcher paper on top of design and shirt.
  • Press at 400 degrees F for 45-55 seconds with medium pressure.
  • Remove paper immediately and peel hot.

*Note: Discard butcher paper after 1 use, bleeding may occur.

**Due to the nature of this item we do not offer refunds

 

NOTE:

All Mockups are digital images and colors can vary when pressed due to monitor settings and press temps.